Big 45 Frontier Metal Cleaner
Home
Order Now
Toll Free 800-342-1548

Thousands of satisfied Customers.

  • Dealers and individuals have made hundreds of dollars on just one package from adding value by cleaning.
  • Many Police Department are satisfied customers.
  • Cast Bullet Association recommends Frontier Metal Cleaner.
  • Skeeter Skelton said, "Try Frontier Metal Cleaner on dirty bores."
  • Elmer Keith said, "It quickly removes barrel leading."
  • Smith N' Jones said, "...was amazed at how well it removed the rust."
  • See cruffler.com site dedicated to the needs of the firearms historian, collector and enthusiasts review on Big 45 Frontier Metal Cleaner

Order Now.
Only $6.00 shipping included

Dealers -
Email for quantity discounts
Or call Toll Free 800-342-1548

Next - Order Form

Back Home

 

This Blog "WHEN IT'S REAL DIRTY" is from Clapp on Handguns from American Rifleman 8/9/2012.
www.americanrifleman.org/blogs/when-its-real-dirty

 

This article is from Shoot! Magazine, Nov-Dec. 2005 issue.

Saddle Bags - Product reviews by Smith N' Jones

Frontier Big 45 Metal Cleaner

The Big 45 Frontier Gun Shop in Sioux Falls, SD is producing a metal cleaning pad, much like the one your mom used to scour the pots and pans. It is made from a special metal alloy that is designed to remove rust, corrosion, and other crud from metal surfaces right down to the original surface finish, without harming that surface. This includes the fine blueing and browning. The cleaning pad is to be used as you would ordinary steel wool but it works better and faster and will not harm the finish. The Big 45 Frontier Metal Cleaner is not recommended for use on cold blued surfaces, anodized aluminum, or brass. I used one of the metal cleaner pads on an old, badly rusted shotgun barrel and action and I was amazed at how well it removed the rust. While there was a lot of deeper rust pitted in places, the pad removed the surface rust from the blueing and indeed, did not remove the blueing itself. It looked like a great product that every shooter should keep in his gun cleaning box. For more information call toll free 800-342-1548. (PO Box 90947, Sioux Falls, SD 57109)

This article is Copyright 2005 Shoot! Magazine.

Top

 

 

This article appeared in Shooting Times, November 1977.

Hipshots by Skeeter Skelton

Try Frontier Metal Cleaner on dirty bores.

Bill Nelson, owner of the Big 45 Frontier Gun Shop (PO Box 90947, Sioux Falls, SD 57109), has a new product to sell, and he has pretty well convinced me that it's a good one. Called Frontier Metal Cleaner, the stuff resembles steel lathe shavings or perhaps very course steel wool. I must admit that I was somewhat skeptical about his claim for it. Among other statements, he wrote, It will clean bores faster than anything on the market. I have found that Ruger .357s after shooting a box of Super X ammo will be leaded so bad you can hardly see the rifling. Normally this lead will be completely removed in less than a minute. Anyone who has spent a few hours trying to scrub out the lead deposits of 50 rounds of factory, plainbased, lead .357 loads from the bore of their favorite six gun, Ruger or otherwise, would then indeed consider the Frontier method worthy of trial. I don't shoot plainbased lead bullets at high velocities in my .357 guns because it is a fact that they lead barrels to an unacceptable degree. To test the new metal cleaner, I implemented an old, rusty 12 gauge shotgun barrel sent by Nelson. He said it had stood out in the elements for a year. There was a light brown coat of rust all along its exterior. The bore was dark and forbidding. As a sort of countertest, I first attempted to clean the bore with solvent and a regular 12 gauge brass brush. After a thorough scrubbing, a good deal of rust remained. Then I employed a brush wrapped (perhaps 'imbedded' is the word) with strands of the metal cleaner. About six passes with the dry brush and cleaner left the bore brilliantly clean and bright. I then used the dry brush on the exterior rust, without any sort of lubricant. It removed the rust, and what original blue had remained before the rusting process was still there, as evidenced by a comparison with unrusted blued surfaces on the barrel. Getting interested. I took down an almost mint 1903 Springfield. I say 'almost mint' because while the exterior is near new, the bore is dark. Undoubtedly some previous owner left it uncleaned after firing corrosive GI ammunition in it. I am attached to the old gun and have scrubbed the hell out of the bore on numerous occasions. It remained a bit cruddy. Wrapping strands of the Frontier metal cleaner around a .30 caliber brush. I made six passes through the bore. It became shiny, the lands and grooves looked sharp, and a few pits, which no cleaner will remove, showed in the grooves. The question arises whether extensive use of the material will wear or otherwise damage the bore. Bill Nelson assures me that it won't. The metal shavings, if they may be called that, are stated to be an alloy of stainless steel, nickel silver, Monel, and zinc. Nelson states, ...with the Metal Cleaner you are putting dozens of cutting edges to work at the same time. It will normally take everything off the surface (rust, dirt, paint, shellac, etc.) without harm to the original surface. Just follow the instructions and don't be afraid to lean into it. I take care of my guns, and very seldom have a cleaning problem that requires the use of an aid like the Frontier Metal Cleaner. But, I would use it infrequently and not have to worry about it causing bore wear. Nelson also recommends his cleaner for use on loading dies and bullet molds.

This article is Copyright 1977 Shooting Times Magazine.

Top
Home | Order Now | Email | How It Works | Shooters | Gun Dealers | Reloaders | Gunsmiths | Collectors
Single Action Shooting | Deleads Bores | Thousands of Satisfied Customers
© Big 45 Frontier Metal Cleaner.